Tight deadline bespoke lighting project for Christopher Jenner Design - Eurostar's Head designer. The project was delivered in a few weeks and involved designing some custom power-led bi-colour light engines for illuminating some lovely glass-blown led fixtures. We prototyped the automated switching system for the lights and after approvals made a controller with embedded programmes. The solution allowed a stand alone led control system and a simple way to providing customer way finding to ticket terminal desks.
Sometimes using a combination of DMX and Analogue LED switching hardware can give the best solution for tight deadline projects. This project involved producing a prototype DMX control and driving system for voltage driven LED’s and programming the hardware with a selection of lighting effects. Afterwards we then embedded the DMX programmes to a 0-10V controller. A success.
The electronics supplied by MegaLED where used on the top floor of the building (or ‘The Marquee’ as Dreambox named it) and used to scroll text around the building.
We was commissioned to supply a bespoke LED Light Control system to power and colour change a few special light guides.
These light guides looked like “faux neon tubes” and was supplied to The Pixel Addicts who are now known as “Immersive”.
Check the video - seriously creative pixel mapping.
Kelly's project involved supplying sign lighting gear to control RGB signage letters. We supplied IP65 waterproof RGB led strip cut to linear lengths of each letter perimeter and specifying, building and supplying RF Control System for wireless remote control of 3 RGB controlled fascia signs.