AM2 – DMX 3 channel RGB Version
AM2 | 3channel DMX Version | AM2DMX-RGB
The AM2 DMX3 is MegaLED’s epic RGB DMX Stand Alone Controller. Provides built in colour change programme and static control with fine colour tuning of Red-Green-Blue light output levels. Speed and brightness control in colour change mode, master brightness control in static mode.
The AM2 DMX is often used with a DMX Driver card for dimming RGB fixtures such as 12V or 24VDC Linear LED Bars and LED Sign Lighting Modules. Simplicity and immediacy is an advantage of the AM2DMX, if you want custom programmes we can also create and embed them.
If ordered with a faceplate, the controller is conveniently designed to fit in a standard double box with the controls mounting it onto the front plate.
We also have full selection of computer programmable controllers that are sold with advanced yet easy to use DMX software.
Compatible DMX Driving Cards:
Any of MegaLEDs DMX Driver Cards.
Most popular: DMX9, DMXMini
Order, explore our discounts or get expert DMX hardware advice today:
AM2 DMX RGB Stand Alone Led Controller | Features:
> Stand Alone controller, providing output signals to DMX dimmer / driver cards.
> RGB Colour Changing, Programme built in
> Speed and Brightness settings
> Ease of Use
> Proven, incredibly reliable
> Custom builds & programming available
> Fits into standard double gang wall plate
> Ideal for Illuminating RGB LED Light Bars
> Ideal for Illuminating LED Sign Lighting Modules.
AM2 Stand Alone DMX RGB Led Controller | Specifications:
Size: 63 x 95mm (PCB).
Fixings: 5x potentiometer shafts if panel mounted or 4x 3.25mm holes.
Weight: 80g approx.
Colour change mode speed:
Loop times adjustable between 7s to 30m.
Power connection: 2x Screw terminals.
Input voltage: 7-24Vdc
Output current: N/A Outputs DMX.
Output voltage: N/A.
PWM Frequency: N/A.
Control resolution: 256 step / 8-bit.
AM2 DMX RGB Stand Alone Led Controller | Operation:
Two modes of operation allow for static (adjustable steady colour / brightness) and RGB colour changing effects.
The colour change pattern is MegaLED’s standard colour change pattern which provides
smooth, flicker free colour transitions.
A random start colour is chosen when colour-change mode is entered.
Static mode allows precise setting of brightness in Red, Green and Blue channels. Additionally, a brightness control is available allowing overall dimming without changing colour. This control is available in both modes of operation.
The mode is selected by a momentary push switch, and the current mode is displayed through a red and green on-board LED.
On power up, the controller will be in the same mode it was last set to. Other and custom LED Lighting programmes can be created and embedded into the AM2 chip, on request.
The controller can be switched off from the mains by pressing the “mode” button for 2 SECONDS.