AM2 – Modular and Stand Alone CV Controller
AM2 | 3channel Modular & Stand Alone Voltage Controller
As a stand alone controller and led driver MegaLED’s top selling AM2 can drive voltage driven LED fixtures. As a modular led driver this card can also dim and drive power-leds when a suitable driver card like the CC-DVR1 is connected.
The AM2 is commonly used for dimming 12 or 24VDC Linear LED Bars and LED Sign Lighting Modules. If ordered with a faceplate, the controller is conveniently designed to fit in a standard double box with the controls mounting it onto the front plate. The AM2 controller features modular output header for unlimited led driving expansion options.
Custom builds, special firmware programming and bespoke configurations of the AM2 are available including RGBW.
Call us today on +44 (0) 208 432 0995 for more information.
Compatible LED Driver / Expansion Cards:
Vdriver CV-VDR1- For voltage LEDs.
PDriver – CC-DVR1 – For constant current PowerLEDs.
AM2 3 channel RGB Modular & Stand Alone Led Controller | Features:
> Modular controller, provides output signals to modular driver cards.
> Operates as a 3channel RGB stand alone controller for voltage leds – 15A | 5A x 3ch.
> RGB Colour Changing, Programme built in
> Speed and Brightness settings
> Ease of Use
> Proven, incredibly reliable
> Custom builds & programming available
> Fits into standard double gang wall plate
> Ideal for Illuminating RGB LED Light Bars
> Ideal for Illuminating LED Sign Lighting Modules.
Also available in options:
DMX Master controller – 3 channel RGB
DMX Master controller – 4 channel RGBW
AM2 3 channel RGB Stand Alone & Modular Led Controller | Specifications:
Size: 63 x 95mm (PCB).
Fixings: 5x potentiometer shafts if panel mounted or 4x 3.25mm holes.
Weight: 80g approx.
Colour change mode speed:
Loop times adjustable between 7s to 30m.
Power connection: 2x Screw terminals.
Input voltage: 7-24Vdc
Output current: 15A – 5A x 3 channels.
Output voltage: Same as input voltage.
PWM Frequency: approx 100hz.
Control resolution: 256 step / 8-bit.
AM2 3 channel RGB Led Controller | Operation:
Two modes of operation allow for static (adjustable steady colour / brightness) and RGB colour changing effects. The colour change pattern is MegaLED’s C14 colour change pattern which provides smooth, flicker free colour transitions. A random start colour is chosen when colour-change mode is entered.
Static mode allows precise setting of brightness in Red, Green, Blue and White channels. Additionally, a brightness control is available allowing overall dimming without changing colour. This control is available in both modes of operation.
The mode is selected by a momentary push switch, and the current mode is displayed through a red and green on-board LED. The controller can be switched off from the mains by pressing the “mode” button for 2 SECONDS.
On power up, the controller will be in the same mode it was last set to. Other and custom LED Lighting programmes can be created and embedded into the AM2 chip, on request.